Napco Security Technologies EXPRESS XP-600 - Manual (Page 7)

Emergency Buttons
The three sets of emergency buttons, if programmed, are always active whether the system is armed
or disarmed. Discuss these Buttons with your installer. The emergency signal will only be activated
when the two respective buttons are pressed at the same time.
Fire Alarm: Simultaneously press E + E to sound a fire alarm, and to alert the central
station of a fire emergency, if so programmed.
Auxiliary Alarm: Simultaneously press F + F to alert the central station of an auxiliary
emergency, if so programmed.
(The nature of this emergency alarm is to be determined by the installer)
Police Emergency: Simultaneously press G + G to sound a police emergency alarm, and to alert
the central station of a fire emergency, if so programmed.
Emergency Conditions
E F G G
E Fire
e Emergency
Enabled?
Yes No
F Auxiliary
F Emergency
Enabled?
Yes No
Ambush Alarm
In the event that you are forced by an intruder to disarm your system, the ambush alarm can be
activated. Disarming the system with the Ambush Code will cause the system to disarm and
simultaneously send a silent ambush alarm signal to Central Station. If your system has the Ambush
feature enabled, the code assigned as the User 6 code will function as your Ambush Code.
G Police
G Emergency
Enabled?
Yes No
Ambush
Alarm
Enabled?
Yes No
7
Oi218a.pub
page 7 Thursday, December 18, 1997 18:29