Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 31)

May 2003 Preparing for installation
Part 2: 1001rp Server Hardware Installation 31
Removing the front bezel and server cover
Introduction
To access the server interior, you must remove both the front bezel and the
server cover.
To remove the front bezel, see page 32.
To remove the server cover, see page 33.
To replace the front bezel, see page 34.
About the front bezel doors
Two locked doors on the front of the server cover the front panel, including
the CD-ROM drive and tape drive.
These doors are part of the front bezel, which covers the front of the server.
You must unlock the front bezel doors before you can remove the front
bezel.