Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 63)

May 2003 Installing the server and connecting the peripheral devices
Part 2: 1001rp Server Hardware Installation 63
However, if you choose to establish a direct point-to-point ELAN
connection, no other device can connect to the ELAN.
5 At the switch, connect the ELAN network cable to an MAU (Ethernet)
transceiver. Then complete the connection from the transceiver to the
switch.
What’s next?
.
DANGER
Risk of fire hazard
MAU model NTRH9069 is not suitable for installation in
ducts, plenums, or other spaces used for environmental air. Do
not install it above a false ceiling or below a raised floor,
unless it can be confirmed that these spaces are not used to
convey environmental air.
IF the server will THEN
be connected to a CLAN continue with page 64.
not be connected to a CLAN continue with installing the software
feature key adapter (dongle). See page
66.