Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 32)

Preparing for installation Standard 1.0
32 CallPilot
To remove the front bezel
1 Unlock and open the double doors of the front bezel. See “A” in the
diagram below.
2 Firmly grasp the front bezel by the hand-holds on either side of the
chassis, and pull the front bezel from the chassis.
.
CAUTION
Risk of equipment damage
Do not attempt to move or lift the server before removing the
front bezel; the server can disengage from the bezel and fall.
G101733
B
A