Nortel Networks CALLPILOT 555-7101-217 - Manual (Page 71)

May 2003 Installing the server and connecting the peripheral devices
Part 2: 1001rp Server Hardware Installation 71
To connect the 1001rp DC server to power
1 Connect the DC power cable to the server, as shown below:
.
DANGER
Risk of electrical shock
„ Only qualified personnel can alter electrical connections.
„ Ensure the PDU is turned off until you are instructed to
turn it on.
Negative
cable (black) Positive
cable (red)
Receptacle for
positive and
negative plug
Posts for
ground wire
Ground wire
(green)
G101737