Chapter 3 developing your application, Ni-vxi, ni-visa, and related terms, Ni-vxi, ni-visa, and related terms -1 – National Instruments VXI-USB User Manual
Page 20: Developing your application
© National Instruments Corporation
3-1
3
Developing Your Application
This chapter discusses the software utilities you can use to start developing
applications that use NI-VXI.
After installing the NI-VXI software, you can begin developing your
VXI/VME application. Be sure to check the release notes for the latest
application development notes and changes.
NI-VXI, NI-VISA, and Related Terms
Before you develop your application, it is important to understand the
difference between NI-VXI, NI-VISA, and similar terms.
•
NI-VXI is the software package that ships with National Instruments
VXI and VME controllers. NI-VXI includes Measurement &
Automation Explorer (MAX), NI-VISA, NI Spy, Resource Manager
(Resman), VXI device drivers, and other utilities for configuring and
controlling your VXI or VME system.
•
NI-VISA is the native API for communicating with VXI/VME devices.
NI-VISA is the National Instruments implementation of the VISA I/O
standard, which is a common interface to many types of instruments
(such as VXI, GPIB, PXI, Serial, TCP/IP, and so on). NI-VXI is
optimized for use through NI-VISA, and NI recommends using
NI-VISA to develop all new VXI/VME applications.
•
The NI-VXI API is an optional development environment that is not
part of the default NI-VXI installation. The NI-VXI API was
developed before NI-VISA; although NI-VXI still supports the
NI-VXI API, NI recommends using NI-VISA for all new VXI/VME
applications. If you must develop an application using the older
NI-VXI API, run the NI-VXI installer and perform a Complete install,
or select the appropriate option in the custom installation screen. Be
sure to review the
section.
•
The NI-VXI compatibility layer allows older programs that use the
NI-VXI API to communicate with VXI devices through VISA. Using
this compatibility layer, older programs can run in NI-VXI 3.0 or later
without being rewritten to use the VISA interface. This layer installs
with NI-VXI by default. It should be completely transparent and