Nortel Networks NN47230-301 - Manual (Page 49)

Changing information within the SREM 49
Cutting, copying, and pasting data between devices
Cut, copy and paste information between devices, such as interface cards,
to save time when you enter data. If you are entering similar data for several
devices, SREM allows you to cut, copy and paste information between
devices.
If moving information between multiple network access devices, SREM
allows you to cut and paste information from one device to another. Copying
is not enabled between devices because you cannot have multiple network
access devices in the Device List with the same configuration data.
Step Action
1 In the Device List, right-click the device with information that you
want to cut or copy.
2 Select Cut or Copy in the right-click menu ( Figure 21 "Right-click
menu" (page 45) ).
Figure 25
Right-click menu
3 In the Device List, right-click the device heading for the network
access device where you want to paste the copied information.
4 Select Paste As in the right-click menu.
The Paste As dialog box appears ( Figure 26 "Paste As dialog box"
(page 49) ).
Figure 26
Paste As dialog box
5 Select the slot for the card to which you want to paste the copied
data.
Nortel Secure Network Access Switch Software Release 1.6.1
Installing and Using Security and Routing Element Manager (SREM)
NN47230-301 02.01 Standard
1.6.1 16 July 2007
Copyright © 2007, Nortel Networks
.