Figure 30 retrieval criteria definition view, Figure 30, Retrieval criteria — definition view – Nortel Networks NN47230-301 User Manual
Page 55
Using the Log Browser tool
55
Note: When using Log Browser, the Retrieval Criteria and
Details sections can be viewed or hidden by clicking the small
arrows beside the section name. Hide these sections as
necessary to see the entire Log Browser tool on systems with
low screen resolution.
2
Select File > Open > Open NSNAS Log File from the Log Browser
menu.
A dialog box appears, allowing you to specify a log file on the current
system.
3
Select the Nortel SNAS 4050 log file to view.
The Retrieval Criteria list displays Attributes that can be used to
limit log results that are displayed.
4
Check to ensure the Retrieval Criteria section is in Definition View.
The Definition View (shown in the figure below
Criteria — Definition View" (page 55)
) allows you to specify attributes
and attribute values to sort and view the log entries.
Figure 30
Retrieval Criteria — Definition View
5
Select a criteria from the list, and set the desired values in the space
available.
After a criteria has been added to the Retrieval list, a checkmark
appears beside the name of that criteria.
6
Repeat
for each criteria you want to use to sort log file entries.
7
Confirm the current list of criteria by changing the Retrieval Criteria
section to Summary View (shown in the figure below
"Retrieval Criteria — Summary View" (page 56)
Nortel Secure Network Access Switch Software Release 1.6.1
Installing and Using Security and Routing Element Manager (SREM)
NN47230-301
02.01
Standard
1.6.1
16 July 2007
Copyright © 2007, Nortel Networks
.