Nortel Networks i2022 Series User Manual
I 2022 series isdn teleset user’s guide
Advertising
Table of contents
Document Outline
- i2022 Series ISDN Teleset User’s Guide
- INTRODUCTION
- FEATURES
- Cross-Compatibility
- Programmable Features and Options
- Programmable Hardkeys
- Firmware Upgrades
- Tilting Display (Backlit)
- Your Teleset has a Liquid Crystal Display (LCD) with 11 settings for the optimum-viewing angle. It displays Caller ID information, CalLog entries, and is used to set up and manage Teleset operation.
- Clock and Alarm
- Password Protection
- Non-Volatile Memory
- Display Icons
- Optional Add-On (EM-32) Call Appearance Module
- Optional Data Modules
- Optional U Interface Module
- Analog Port
- VOICE OPERATION FEATURES
- ACCESSORIES
- INSTALLATION
- PARTS LIST
- ISDN INTERFACES
- LINE AND POWER CONNECTIONS – i2022 TELESET
- PS1/PS2 SWITCH SETTINGS
- TERMINATING RESISTORS
- POINT-TO-POINT CIRCUITS
- PASSIVE-BUS OR MULTIPOINT
- i2022 EQUIPPED WITH A U INTERFACE MODULE
- TERMINATING RESISTORS
- LINE CONFIGURATION
- INSTALLING THE LOGO PLATE
- ASSEMBLING THE i2022
- SOFTKEYS
- CONNECTING THE i2022- AUTO-INSTALL
- AUTO-Install
- AUTO-Switch
- AUTO-SPID
- Auto-SPID Procedures
- Auto-Download
- Manually Choose the Switch Type
- Manually Entering the SPID
- Manual Switch Downloading
- Manually Programming Call Appearances
- Manually Programming Feature Keys
- Assigning the Conference/Transfer/Drop/Call Forward/Call Pickup/Message Waiting 1/Message Waiting 2 Features Manually
- SETTING UP THE TELESET
- Adjusting the Display Viewing Angle
- Setting the Contrast
- Setting the Backlighting Options
- Setting the Date and Time Clock
- Ringing Patterns
- 2nd Ring
- PrimCA (Primary Call Appearance)
- CONFCA (Conference Call Appearance)
- Intercom
- Speed Dial Key Assignment
- Editing a Speed Dial Number
- Setting the Alarm Time
- PASSWORD SELECTION
- LANGUAGE OPTIONS
- OPERATIONS
- TELESET FEATURES
- ADVANCED FEATURES
- MAINTAINING THE TELESET
- CHECKING THE FW VERSION
- LOADING FW
- TROUBLESHOOTING PROBLEMS
- Clock Flashes (Clock does not flash on sets with firmware dated K121003 or late)
- No Display
- Speakerphone Does Not Work/No Sound From Speaker
- Missing Feature Keys
- Missing Call Appearances Same as “Missing Feature Keys.”
- No Transmit from Headset, Receives OK
- Line Not Ready
- Can’t Set DSS/BLF, ConfCA, or Other CA Types
- Can’t Set Call Appearances back to PrimCA
- GLOSSARY