Key clicks, Disable logging, Disabling call logs completely – Nortel Networks i2022 Series User Manual

Page 56: Disable call logs on shared call appearance, Testing

Advertising
background image

i

2022 ISDN Teleset

54

To unprotect the keys, press them again and the key will go dark.



KEY CLICKS

Key clicks can be enabled or disabled by pressing MENU, and dialing 96 on the touchtone keypad.

DISABLE LOGGING

Call logs can be disabled completely so that no calls will log, or, they can be disabled so “shared” Call Appearances will
not log.

Disabling Call Logs Completely

To disable Call Logging so NO calls will log, press MENU and dial 97 on the touchtone keypad. Press Yes to disable call
logging. Press No to enable call logging.

Disable Call Logs On Shared Call Appearance

Call Logs can be disabled on Shared Call Appearances by changing the Shared Call Appearances from Prime Call
Appearances to General Call Appearances.

To change Prime Call Appearances to General Call Appearances, press MENU, MORE, MORE, Config, MORE,
PrimCA

. For further information, see “PrimCA (Primary Call Appearance)”.





TESTING

You can test the operation of your Teleset by using a simple, built-in diagnostic procedure. To begin, follow these steps.
1. Press

MENU

, MORE, Test

2. Select the test you wish to run.
3. Press

the

MENU

key to exit.


Error Types have “or bit relation”. This
means the code being displayed may be a
combination of more than one error code.
For example, if the error code displayed is
“10”, it would mean an “S-Interface” has
error has
occurred in self-test. If the error code
displayed is “1C”, it would mean a “Flash”,

“RTC” and an “S Interface” error has occurred in self-test.

CODE ERROR

TYPE

MEANING

01

RAM Error

Failure in RAM or associated circuits

04

RTC Error

Failure in the clock or associated circuits

08

FLASH Error

Failure in memory or associated circuits

10

S Error

Failure detected on the S Interface

20

E Error

Failure detected on the U Interface

40

F Error

Failure detected in FW Download

NOTE: Protecting the keys does not prevent Speed dial keys from being changed locally using Menu, SpDial.

NOTE: Remember, changing a Prime CA to a General CA, removes it from the Call Appearances that will be

answered by Ringing Line Preference.

Advertising