Nortel Networks i2022 Series - Manual (Page 32)

i 2022 ISDN Teleset
30
After the entire number is viewed, press the edit key and edit the number as above.
To originate a call using the Speed Dial key, press the button that has been programmed with the number to be dialed.
The Teleset will automatically select a line and dial the number. An alternate operation is to go off-hook on the handset
and then press the speed dial key.
Setting the Alarm Time
Five different alarm clock ring patterns can be set. Setting the alarm is done as shown below. You may also wish to look
at the flowchart for a graphic representation of the programming sequence. You can set an alarm to sound at a specific
time, or at the same time every day. A maximum of ten alarms may be set.
1. Press
MENU , Alarm
2. Press Change .
NOTE: Speed Dial keys can be programmed to send Touchtones after a call has been connected. This is useful
for programming voice mail passwords or pager numbers. After entering the voice mail telephone
number, insert 2 or 3 pauses and enter you password.
NOTE: If you dial “9” for a Centrex or PBX outside line, or a “1” to access long distance, include that digit.