NETGEAR DGND3300 - Manual (Page 38)

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
2-14 Safeguarding Your Network
v1.0, March 2009
The WPS settings show the modem router PIN, Disable Router’s PIN, and the Keep Existing
Wireless Settings check box.
By default, the Keep Existing Wireless Settings check box is cleared. This allows the modem
router to automatically generate the SSID and WPA/WPA2 security settings when it implements
WPS. After WPS is implemented, the modem router automatically selects this check box so that
your SSID and wireless security settings remain the same if you add WPS-enabled devices or if
you manually add non WPS-capable devices later.
Connecting Additional Wireless Client Devices After WPS
Setup
You can add more WPS clients to your wireless network, or you can add a combination of WPS-
enabled clients and clients without WPS.
Adding More WPS Clients
To add a wireless client device that is WPS-enabled:
1. Follow the procedures in “Using a WPS Button to Add a WPS Client” on page 2-11 or “Using
PIN Entry to Add a WPS Client” on page 2-12 .
2. To view a list of all devices connected to your modem router (including wireless and Ethernet-
connected), see “Viewing a List of Attached Devices” on page 4-8 .
Note: If you clear the Keep Existing Wireless Settings check box, all wireless settings
and connections will be lost if a WPS client is added.
Note: Your wireless settings remain the same when you add another WPS-enabled client,
as long as the Keep Existing Wireless Settings check box is selected in the
Advanced Wireless screen (listed under the Advanced heading in the modem router
main menu). If you clear this check box, when you add the client, a new SSID and
passphrase will be generated, and all existing connected wireless clients will be
disassociated and disconnected from the modem router.