NETGEAR DGND3300 User Manual
Page 69
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Using Network Monitoring Tools
4-13
v1.0, March 2009
2. Under Allow Remote Access By, specify what external IP addresses will be allowed to access
the modem router’s remote management.
•
To allow access from any IP address on the Internet, select Everyone.
•
To allow access from a range of IP addresses on the Internet, select IP Address Range.
Enter a beginning and ending IP address to define the allowed range.
•
To allow access from a single IP address on the Internet, select Only This Computer.
Enter the IP address that will be allowed access.
3. Specify the port number for accessing the management interface.
Normal Web browser access uses the standard HTTP service port 80. For greater security,
enter a custom port number for the remote management Web interface. Choose a number
between 1024 and 65535, but do not use the number of any common service port. The default
is 8080, which is a common alternate for HTTP.
4. Click Apply to have your changes take effect.
Note: For enhanced security, restrict access to as few external IP addresses as
practical.
Note: When accessing your modem router from the Internet, type your modem router’s
WAN IP address into your browser’s address or location field, followed by a colon
(:) and the custom port number. For example, if your external address is
134.177.0.123 and you use port number 8080, then enter http://
134.177.0.123:8080 in your browser.