NETGEAR DGND3300 - Manual (Page 49)

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Protecting Your Network 3-7
v1.0, March 2009
Depending on your selection, either the Outbound Services screen or Inbound Services screen
is displayed.
2. Select the service that you want to add or edit.
3. Enter the settings to specify the service (see Table 3-1 on page 3-7 ).
4. Click Apply to have your changes take effect.
The new rule will be listed in the table when you return to the Firewall Rules screen.
Figure 3-5
Table 3-1. Adding or Editing Firewall Service Rules
Field Outbound Rules Inbound Rules
Action • For Outbound rules, ALLOW rules are
only useful if the traffic is already covered
by a BLOCK rule. (That is, you want to
allow a subset of traffic that is currently
blocked by another rule.)
• To define the schedule used in these
selections, use the Schedule screen (see
“Scheduling Blocking” on page 3-10 ).
• For Inbound rules, BLOCK rules are only
useful if the traffic is already covered by
an ALLOW rule. (That is, you want to
block a subset of traffic that is currently
allowed by another rule.)
• To define the schedule used in these
selections, use the Schedule screen (see
“Scheduling Blocking” on page 3-10 ).