NETGEAR DGND3300 - Manual (Page 58)

RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
4-2 Using Network Monitoring Tools
v1.0, March 2009
If the modem router discovers a newer version of firmware, the message on the left displays. If no
new firmware is available, the message on the right displays.
To upgrade, click Yes to allow the modem router to download and install the new firmware.
When the upload is complete, your modem router automatically restarts. The upgrade process
typically takes about one minute. Read the new firmware release notes to determine whether you
must reconfigure the router after upgrading.
Manually Checking for Firmware Upgrades
You can use the Router Upgrade screen to manually check the NETGEAR website for newer
versions of firmware for your product.
To manually check for new firmware and install it on your modem router:
1. Under Maintenance on the main menu, select Router Status. Note the version number of your
modem router firmware.
2. Go to the DGND3300 support page on the NETGEAR website at
http://www.netgear.com/support .
Note: To turn off the automatic firmware check at log in, clear the Check for Updated
Firmware Upon Log-in check box on the Router Upgrade screen.
Figure 4-2
Warning: When uploading firmware to the modem router, do not interrupt the Web
browser by closing the window, clicking a link, or loading a new page. If the
browser is interrupted, it could corrupt the firmware.