Nortel Networks NN43001-315 - Manual (Page 133)

IBM x306m server 133
Table 7
IBM x306m LED description and status
Description Status
Power LED If this LED is lit, it indicates that the server is
turned on.
If this LED is off, it indicates that AC power is
not present, or the power supply or the LED
itself failed.
Hard disk LED If this LED is lit, it indicates that a hard disk
drive is in use.
Locator LEDIf When this LED is lit, it is lit remotely by the
system administrator to aid in visually locating
the server.
System Error LED If this LED is lit, it indicates that a system error
occurred.
Figure 123
IBM x306m rear view
ATTENTION
The TLAN & ELAN port positions are reversed (L and R, 1 and 2) compared to
the HP DL320 server.Ethernet speed LED:
•
Lit indicates Ethernet network speed of 1 Gbps.
•
Off indicates Ethernet network speed is 10/100 Mbps.
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.