Nortel Networks NN43001-315 - Manual (Page 98)

98 Installation and configuration of applications on Linux base
9 The Primary Security Service server TLAN IP address screen
appears as shown in
Figure 98 "Primary Security Service server
TLAN IP address window" (page 98) . Enter the IP address of
the TLAN network interface Primary Security Service server.
Type Yes to confirm the TLAN IP address is correct or type No
to return to the Primary Security Service server TLAN IP address
screen. Press Enter to continue.
Figure 98
Primary Security Service server TLAN IP address window
10 The Primary Security Service server Fully Qualified Domain
Name (FQDN) screen appears as shown in
Figure 99 "Primary
Security Service server Fully Qualified Domain name window"
(page 98)
. Enter the Fully Qualified Domain name of the Primary
Security Service server. Type Yes to confirm the FQDN is
correct or type No to return to the Primary Security Service
server Fully Qualified Domain Name screen. For a definition of
FQDN see
"FQDN requirements, page 30" (page 36) . Press
Enter to continue.
Figure 99
Primary Security Service server Fully Qualified Domain name window
Note:
•
The Primary Security Service must be up and running
at this point.
• You need to know the password for the "nortel"
account on the Primary Security Service server.
Installation will fail if you do not know this password.
11 The Primary Security Service fingerprint screen appears as
shown in
Figure 100 "Primary Security Service fingerprint
Nortel Communication Server 1000
Linux Platform Base and Applications Installation and Commissioning
NN43001-315 02.09
29 October 2008
Copyright © 2007–2008 Nortel Networks
.