NAD T 765 - Manual (Page 32)

ABOUT DAB RADIO
The T 765 has a Digital Audio Broadcast (DAB) module socket on the rear
panel for adding a separately sold and NAD-specified outboard DAB
module – the NAD DAB Adaptor DB 1. All the control software for this
format is included; just plug-in the module and start enjoying the CD-like
quality sound and expansive content selection available with DAB.
CONNECTING THE DAB MODULE
Plug-in the other end of the DIN connector (supplied with your NAD DAB
Adaptor DB 1) from the DAB module’s output port into the corresponding
DAB module input socket on the rear panel of the T 765. Select DAB mode
on the T 765 by toggling the ‘AM/FM/DB’ button in the front panel. If there
is no NAD DAB Adaptor DB 1 connected, the VFD will show ‘Check DAB
Tuner’.
Refer to your NAD DAB Adaptor DB 1’s owner’s manual for the module’s
applicable user interface guide with respect to the T 765.
ABOUT iPod INPUT FEATURE
The T 765 is equipped with a data port in the rear panel where an optional
NAD iPod dock station can be plugged in. With the NAD iPod dock linking
the T 765 with your own iPod player, you can enjoy listening to your favorite
tracks and playlists as well as view applicable still image and video playback.
You can control your iPod player using the assigned buttons in the T 765
front panel. And with the corresponding HTR 3 remote control function
keys, you can select the materials stored in your iPod for playback as well as
access many of its functions even from across the room. The optional NAD
iPod docking station also charges your iPod player while it is connected to
the T 765.
NOTES
• NAD iPod docking station and iPod player are optional and not supplied
with your T 765.
• iPod player functions, features and playback capabilities accessible
through T 765 may vary depending on your iPod player model.
• When using the HTR 3 to control the iPod functions, make sure that the
Device Selector is set to “AMP.”
CONNECTING THE OPTIONAL NAD iPod DOCKING STATION AND
iPod PLAYER TO THE T 765
Make sure that all the devices are unplugged before making the
connections.
1. Connect the NAD iPod docking station’s plug into the T 765’s ‘MP DOCK’
data port.
2. Connect also the iPod docking station’s S-video out and audio out to
the T 765 Audio 5/Video 5 input (the default iPod source allocation in
the T 765). You can also connect both audio and video out connectors
to any available assignable input of the T 765.
3. Dock your iPod player into the NAD iPod docking station.
NAVIGATING THE iPod PLAYER’S FUNCTIONS AND FEATURES
After linking together your iPod player, NAD iPod docking station and the
T 765, you can now plug them IN to their applicable power sources.
1. With your T 765, iPod player and NAD iPod docking station all at power
ON state, select SOURCE 5 of your T 765. Your iPod player will show in
its display the NAD logo and below it “OK to disconnect.” On the other
hand, the T 765 VFD will show in the upper line “iPod Menu” and the
lower line “Playlists”. The lower line will vary depending on the current
menu selected.
At the same time, the T 765 OSD will display the whole iPod Menu
selections like Playlists, Artists, Albums, Songs, Podcasts, Genres,
Composers and Audiobooks.
2. Navigate through the iPod menu selections using a combination of the
[ ] buttons.
NOTES
• The iPod player’s click wheel and controls will not operate when it is
properly connected to the T 765 via the NAD docking station.
• To exit from the iPod Menu at Source 5, press [ ] bringing you to ‘Menu
Select’ OSD. Follow the instructions as shown.
CONTROL FEATURES AND SETTINGS
The following control functions and settings are selectable or enabled
using the front panel and HTR 3 remote control buttons. Since the HTR
3 will be the primary controller in most cases, we will focus on remote-
controlled operations.
ENTER
Press [ENTER] to go “iPod Settings’ menu where you can setup the following
options:
Shuffle : Select [Shuffle] to enable random playback of either [Songs]
or [Albums] lists. To turn off shuffle mode, select [Off].
Repeat : Select [One] for repeated playback of the current song. Select
[All] for repeated playback of your entire list under [Songs] selection.
Audiobook Speed : The playback speed of your audiobook can be
varied according to your preference. During audiobook playback,
adjust the reading speed to [Normal], [Fast] or [Slow].
DISP
During playback, toggle [DISP] key of HTR 3 to show in the T 765 VFD upper
line the Song title, Artist Name and Album title. If there are no information
available, the display will show “No Song,” “No Artist” or “No Album” as
applicable. Aside from these information, the lower line will display the
current title’s track number allocation and time elapsed.
The equivalent front panel key for [DISP] is [INFO].
OPERATION
USING THE T 765 – AM/FM/DB/iPod

EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й