National Instruments cFP-RTD-124 - Manual (Page 13)

© National Instruments Corp. 13 FP-RTD-124 and cFP-RTD-124
Safety
The [c]FP-RTD-124 is designed to meet the requirements of the
following standards for safety and electrical equipment for
measurement, control, and laboratory use.
• EN 61010-1, IEC 61010-1
• UL 3121-1
• CAN/CSA C22.2 No. 1010.1
For certifications under regulatory standards, including hazardous
location standards, refer to the product label or to
ni.com .
Electromagnetic Compatibility
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Electromagnetic emissions ............... EN 55011 Class A at 10 m
FCC Part 15A above 1 GHz
Electromagnetic immunity................ Evaluated to EN 61326:
1997/A1: 1998, Table 1
Note For full EMC compliance, you must operate this
device with shielded cabling. Refer to the Declaration
of Conformity (DoC) for this product for any additional
regulatory compliance information. To obtain the DoC
for this product, click Declaration of Conformity at
ni.com/hardref.nsf/ . Refer to the Read Me First
document that accompanies the product for regulatory
statements regarding FCC compliance.