Battery level, Connecting the base unit, Connecting the base unit -3 – NETGEAR SPH200D User Manual
Page 29
Cordless Internet Phone with Skype Model SPH200D User Manual
Installation
2-3
v1.0, November 2006
Battery Level
The battery icon displays the current battery level.
Your handset may power down if it is not charged after the battery is empty. If you are on the
phone while the battery is nearly empty, you will hear warning tones. Your call maybe cut off
shortly after the warning.
Connecting the Base Unit
To connect the base unit, follow these steps:
1. Connect one end of the power adapter to the base unit, and the other to a standard wall outlet.
2. You can connect the Ethernet cable, the telephone line cord, or both.
•
For Internet calling, use the provided Ethernet cable to connect the base unit to your
gateway, router, or modem (ADSL or cable).
•
For landline calling, connect the telephone line cord to the base unit and the wall phone
socket.
100% full
60% full
30% full
Empty
(charging
required)
Figure 2-2
power
telephone
line cord
Ethernet