NETGEAR SPH200D - Manual (Page 73)

Cordless Internet Phone with Skype Model SPH200D User Manual
Settings and Maintenance 7-11
v1.0, November 2006
No parking tone. • Check the power connections of the charger.
• The handset may not be placed properly. Try again.
• Charging contacts may be dirty. Clean contacts with a damp cloth.
• Turn on the handset tone. See
“Personalizing Your Handset Display”
in Chapter 6 .
• Switch on the handset’s power. See “Powering Your Handset On and
Off” in Chapter 1 .
Handset on the charger does not
charge. • The battery may be defective. Purchase new batteries from your
dealer.
• Check that the batteries are inserted correctly.
• Make sure that the handset is placed properly on the charger. The
battery icon is animated while charging.
No display. • Check that the battery is charged.
• Check the connections.
Bad audio (crackles, echo). • The handset may be nearly out of range. Move closer.
• The phone may be interfered by nearby electrical appliance. Move
the base unit to a different location.
• The phone may be at a location with thick walls. Move the base unit
to a different location.
Handset does not ring. Check that the handset ringer is turned on. See “Personalizing Your
Handset Display” in Chapter 6 .
Caller ID does not display. • Caller ID service may not be activated. Check with your service
provider.
• The caller’s information may be withheld or unavailable.
Cannot make or answer a second
call. • Second call service may not be activated. Check with your service
provider.
• For landline calling, check that the recall selection is correct. See
“Recall Selection” on page 7-6 .
Table 7-1. Troubleshooting Tips (continued)