NETGEAR SPH200D - Manual (Page 68)

Cordless Internet Phone with Skype Model SPH200D User Manual
7-6 Settings and Maintenance
v1.0, November 2006
2. Scroll to the handset (number) that you want to delete. Press Enter.
3. Enter the system PIN. Press Clear to make corrections.
4. Press Enter.
The handset is deleted.
Advanced Landline Calling Features
This section describes the call-related features that apply to the landline only.
Dial Mode
Dial mode is the telephone signal used in your country. Your phone supports tone (DTMF) and
pulse (rotary) dialing. During installation, you set up your phone for use in your country. For
details, consult your service provider.
To go to dial mode, follow these steps:
1. Press Menu>Settings>Advanced> Landline>Dial Mode.
2. Scroll to the new setting.
3. Press OK.
The new setting is saved.
Recall Selection
Recall is a signal that is sent when using some of the calling features such as making or answering
a second call. Your phone supports different recall signals. You can make changes depending on
the requirements. Your phone is already set up for use in your country. For details, consult your
service provider.
Tip: The handset number displays beside the word “Skype” during standby. For
example, Skype (1)
Tip: If your phone is set to pulse dialing, press and hold during a call for temporary
tone mode. The display shows d. Digits entered after the d are sent out as tone
signals (on this call only).