Power and safety, Power requirements, Power and safety” in appendix a – NETGEAR SPH200D User Manual

Page 77

Advertising
background image

Cordless Internet Phone with Skype Model SPH200D User Manual

Default Factory Settings and Technical Specifications

A-3

v1.0, November 2006

Power and Safety

Power Requirements

To install the Cordless Internet Phone with Skype Model SPH200D, you need the following:

North America:

— 120 volts, single-phase AC.

— This product requires an electrical supply of 120 volts, single-phase alternating current,

excluding IT installations defined in standard UL 60950-1.

Europe:

— 220-230 volts, single-phase AC.

— This product requires an electrical supply of 220-230 volts, single-phase alternating

current, excluding IT installations defined in standard EN 60950-1.

Warning: The electrical network is classified as dangerous according to criteria in the

standard EN 60950-1. The only way to power down this product is by
unplugging the power supply from the electrical outlet. Ensure the electrical
outlet is located close to apparatus and is always easily accessible.

Warning: Use only the adapter supplied with this equipment. Incorrect adapter polarity

or voltage can seriously damage the unit.

Table A-2.

North America

Europe

Handset Charger Adapter
Input: 120VAC 60Hz
Output: 7.5VDC 150mA

Handset Charger Adapter
Input: 230VAC 50Hz
Output: 7.5VDC 150mA

OR

Base Unit Adapter
Input: 120VAC 60Hz
Output: 7.5VDC 500mA

Base Unit Adapter
Input: 230VAC 50Hz
Output: 7.5VDC 500mA

Advertising