National Instruments NI 6232 - Manual (Page 18)

© National Instruments Corporation 1-1 NI 6232/6233 User Manual
1
Getting Started
M Series NI 6232/6233 devices feature sixteen analog input (AI) channels,
two analog output (AO) channels, two counters, six lines of digital input
(DI), and four lines of digital output (DO). If you have not already installed
your device, refer to the DAQ Getting Started Guide. For NI 6232/6233
device specifications, refer to the NI 6232/6233 Specifications on
ni.com/manuals .
Before installing your DAQ device, you must install the software you plan
to use with the device.
Installing NI-DAQmx
The DAQ Getting Started Guide, which you can download at
ni.com/manuals , offers NI-DAQmx users step-by-step instructions for
installing software and hardware, configuring channels and tasks, and
getting started developing an application.
Installing Other Software
If you are using other software, refer to the installation instructions that
accompany your software.
Installing the Hardware
The DAQ Getting Started Guide contains non-software-specific
information on how to install PCI and PXI devices, as well as accessories
and cables.
Device Pinouts
Refer to Appendix A, Device-Specific Information , for the NI 6232/6233
device pinout.