National Instruments 370620B-01 - Manual (Page 7)

© National Instruments Corporation 7 PCI/PXI Gigabit Ethernet Adapters Installation Guide
2. Install the hardware and cables, then power on the computer as shown
in the following figure.
3. Install the Windows 2000/XP Ethernet drivers.
Windows 2000
Windows automatically detects the new hardware and displays a
Found New Hardware Wizard window, as shown in the following
figure. Insert the PCI/PXI Gigabit Ethernet Adapters CD-ROM and
follow the directions. Choose the Recommended options when given
a choice.