National Instruments Fieldpoint CFP-2220 - Manual (Page 10)

cFP-2200/2210/2220 10 ni.com
Mounting the Backplane in a Standard 19 in. Rack
The rack-mount kit for Compact FieldPoint is NI part number 778615-01.
The following figure shows the dimensions of the rack-mount kit.
Figure 15. Dimensions of Rack-Mount Kit
Complete the following steps to mount the system in a rack.
1. Fasten the rack-mount bracket to the back of the cFP-BP-x using the
captive screws on the bracket.
2 ×
21.34 mm
(0.840 in.)
4 × Radius
2.29 mm
(0.090 in.)
444.5 mm
(17.500 in.)
2.29 mm
(0.090 in.)
8 × Diameter
374.65 mm
(14.750 in.)
278.89 mm
(10.980 in.)
177.8 mm
(7.000 in.)
25.4 mm
(1.000 in.)
66.29 mm
(2.610 in.)
37.69 mm
(1.484 in.)
37.72 mm
(1.485 in.)
152.15 mm
(5.990 in.)
76.2 mm
(3.000 in.)
152.4 mm
(6.000 in.) 33.15 mm
(1.305 in.)
132.56 mm
(5.219 in.)
82.52 mm
(3.249 in.)
38.1 mm
(1.500 in.)
2 ×
34.93 mm
(1.375 in.)
2 × Radius
25.4 mm
(1.000 in.)
50.8 mm
(2.00 in.)
+0.003 in.
–0.001 in.
25.02 mm (0.985 in.)
2 ×
6.91 mm
(0.272 in.) 63.07 mm
(2.483 in.)
0.250 in.
+0.07 mm
–0.02 mm
6.35 mm
( )
+0.003 in.
–0.000 in.
0.312 in.
+0.07 mm
0 mm
7.92 mm
( )
179.32 mm
(7.060 in.)
Diameter
Diameter
10.59 mm
(0.417 in.)
7.06 mm
(0.278 in.)
Full Radius
4 Ч