NetComm N300 - Manual (Page 60)

ADSL2+ Wireless N300 Modem Router with VoIP User Guide YML9WMAXXN
60 www.netcomm.com.au
9.4.4 ADSL Statistics
The following graphic shows the ADSL Network Statistics screen. The Reset button (located at the bottom of the screen) can be used to
reset statistics. The bit error rate can be tested by clicking the ADSL BER Test button.
Consult the table that follows for field descriptions.
Field Description
Mode Line Coding format (e.g. G.dmt, G.lite, T1.413, ADSL2)
Line Coding Trellis On/Off
Status Lists the status of the ADSL link
Link Power State Link output power state.
SNR Margin (dB) Signal to Noise Ratio (SNR) margin
Attenuation (dB) Estimate of average loop attenuation in the downstream direction.
Output Power (dBm) Total upstream output power
Attainable Rate
(Kbps) The sync rate you would obtain.
Rate (Kbps) Current sync rate.
In G.DMT mode the following section is inserted here.
K Number of bytes in DMT frame
R Number of check bytes in RS code word
S RS code word size in DMT frame
D The interleaver depth
Delay The delay in milliseconds (msec)