NetComm N300 - Manual (Page 61)

YML9WMAXXN ADSL2+ Wireless N300 Modem Router with VoIP User Guide
www.netcomm.com.au 61
NetComm Gateway TM Series - ADSL2+ Wireless N300 Modem Router with VoIP
In ADSL2+ mode the following section is inserted here.
MSGc Number of bytes in overhead channel message
B Number of bytes in Mux Data Frame
M Number of Mux Data Frames in FEC Data Frame
T Max Data Frames over sync bytes
R Number of check bytes in FEC Data Frame
S Ratio of FEC over PMD Data Frame length
L Number of bits in PMD Data Frame
D The interleaver depth
Delay The delay in milliseconds (msec)
Super Frames Total number of super frames
Super Frame Errors Number of super frames received with errors
RS Words Total number of Reed-Solomon code errors
RS Correctable Errors Total Number of RS with correctable errors
RS Uncorrectable Errors Total Number of RS words with uncorrectable errors
HEC Errors Total Number of Header Error Checksum errors
OCD Errors Total Number of out-of-cell Delineation errors
LCD Errors Total number of Loss of Cell Delineation
Total Cells Total number of ATM cells (including idle and data cells)
Data Cells Total number of ATM data cells
Bit Errors Total number of bit errors
In ADSL2+ mode the following section is inserted here.
Total ES: Total Number of Errored Seconds
Total SES: Total Number of Severely Errored Seconds
Total UAS: Total Number of Unavailable Seconds
9.5 Route
Clicking on ‘Status’, then ‘Route’ shows the advanced route configuration of your NB9WMAXXn
9.6 ARP
Clicking on ‘Status’, then ‘ARP’ shows the current ARP table (The automatic mapping of IP Addresses to MAC addresses) on the
NB9WMAXXn.
9.7 DHCP
Provides summary of DHCP leases provisioned by NB9WMAXXn. Useful source to find client machine MAC addresses.