Scsi chain connection with other devices, Connecting the ls-4500af – Nikon LS-4500AF User Manual
Page 39
19
Nikon
Film Scanner LS-4500AF User's Manual
SCSI Chain Connection with Other Devices
If LS-4500AF is connected at the end of the SCSI chain;
•
Connect the 50-pin full pitch connector of the SCSI cable to the SCSI
connector located on the rear panel of the unit, and insert the other end
to the SCSI connector of other SCSI device.
•
Connect the supplied terminator (terminal resistance) to the other SCSI
connector on the rear panel of the unit.
If LS-4500AF is connected between the other SCSI devices;
•
Connect the 50-pin full pitch connector of the SCSI cable to the SCSI
connector located on the rear of the unit, and insert the other end to the
SCSI connector of other SCSI device.
•
Connect the other SCSI device by using the other SCSI connector on
the rear panel of the unit.
•
Connect the terminator (terminal resistance) to the SCSI device con-
nected at the end of SCSI chain.
Terminator inside
Terminator inside
4. Connecting the LS-4500AF