Nikon LS-4500AF - Manual (Page 61)

41 Nikon Film Scanner LS-4500AF User's Manual
8. Transportation
When transporting the unit, first remove the film holder following the
procedure below. Move the stage to the position for transportation at the
rear of the unit, fasten the locking screw, and pack using the original
package box and packing material provided by Nikon. If the locking screw
is not completely fastened, and the unit is subjected to excessive vibration
or shock, the unit may be damaged.
Procedure for Locking before Transportation
1. Remove the film holder by means of a normal eject operation.
2. Keep the Eject button on the front panel of the unit pressed down for
more than three seconds. The stage will move backward and stop at the
transportation position. You will hear the stage moving. When the
stage begins to move, release the Eject button. If you continue to press
the Eject button during the transition to the transportation position,
another eject operation will be carried out.
3. When the BUSY LED goes out, turn the power off and remove the
power cord and connection cable from the unit.
4. Turn the locking screw on the back of the unit clockwise as far as it will
go. The stage will then be fixed firmly in place.
To fasten the locking screw
8. Transportation