Nikon LS-4500AF - Manual (Page 8)

vi Nikon Film Scanner LS-4500AF User’s Manual
Safety Precautions
To ensure safe and proper use of the LS-4500AF, and to prevent problems,
please take special note of the following points:
• Be sure to use an AC100V-120V/AC 200V - 240V, 50/60Hz power
supply. The power cord should be changed to suit the power voltage.
When using a power voltage of more than AC 125V:
Use a power cord that meets the safety standards of the country in
which it is used with insulation of at least SVT type and more than
AWG18 in thickness, and a plug with an AC 250V, 15A rating (NEMA
6P-15.
When using a power voltage of AC 125V or less:
Use a power cord that meets the safety standards of the country in
which it is used with insulation of at least SVT type and more than
AWG18 in thickness, and a plug with an AC 125V, 10A rating.
• Make sure that the electrical outlet of the power supply is grounded.
Use the same grounding route used for other equipment connected to
the LS-4500AF. Unless common grounding is used, a ground loop will
occur, which will result in noise static and the danger of an electric
shock.
• Do not ground the equipment to a gas or water pipe.
*The shape of the plug depends
on the country of use.