Appendix: specifications – Nikon LS-4500AF User Manual
Page 71
51
Nikon
Film Scanner LS-4500AF User's Manual
Appendix: Specifications
Film used:
Transparent film
Scanning method:
Planar scanning, film moving type
Sensor:
5,000 pixel CCD linear sensor
Lamp:
12V 20W Halogen lamp
Color separation:
Surface sequence 3-pass method (red, green,
blue optical filter)
Scanning area:
5 x 6 inches (4 x 5 inch optical system) 1.66 x
6 inches (35mm optical system)
Optical resolution:
1,000dpi x 2,000dpi (4 x 5 inch optical system)
3,000dpi x 3,000dpi (35mm optical system)
Interpolation resolution: 2,000dpi x 2,000dpi (4 x 5 inch optical system)
3,000dpi maximum (35mm optical system)
Resolution:
From 50dpi to maximum resolution in 1dpi
steps
A/D conversion:
12 bits/color
Dynamic range:
3.0 or more
Output data:
Monochrome, dither, full color (8 bits/color, 12
bits/color)
Scanning modes:
Fast mode, normal mode, high quality mode
Focus:
Auto, manual
Setup:
Auto, manual
Sharpness:
3 x 3 matrix can be set by user
Appendix: Specifications