2 connecting the power cord – Nikon LS-4500AF User Manual

Page 36

Advertising
background image

16

Nikon

Film Scanner LS-4500AF User's Manual

4.2

Connecting the Power Cord

Before connecting the power cord, confirm that the unit's power switch is
in the off position.

Insert the female end of the supplied power cord into the AC inlet located
on the rear panel, then insert the plug into the AC power outlet.

The power source must be grounded.

If possible, try to use an independent electric outlet. If the unit is
connected to an outlet to which an electric household appliance, such

as a vacuum cleaner or air-conditioner, is connected, the product may
experience power source noise interference.

Do not extend the power cord of the product, as this may cause mal-
function.

*The shape of the plug depends
on the country of use.

4. Connecting the LS-4500AF

Advertising
This manual is related to the following products: