Nikon LS-4500AF - Manual (Page 69)

49 Nikon Film Scanner LS-4500AF User's Manual
10. Troubleshooting
If something unusual should occur during operation of the scanner, refer to
the software manual and the troubleshooting section below.
Scanning cannot be performed.
• Did you release the transportation locking screw? When the unit is
shipped, the locking screw is locked. If the lock has not been released,
release the lock following the directions in this manual.
• Is the SCSI cable connected?
• Is a high impedance SCSI cable being used?
• Have both ends of the SCSI connection been terminated?
• Is there duplication of the SCSI ID number?
• Is the SCSI board being used recommended by Nikon? (For Windows
version)
• Do the settings of the I/O, INT, DMA channel, etc., on the SCSI board
coincide with those of another board? (For Windows version)
• Has software been installed? For software installation and operation,
refer to the software manual.
• Are the configuration settings, such as CONFIG.SYS, correct? Note
that some configurations may be changed automatically when a Win-
dows application or other applications is installed. (For Windows
version)
• Have other SCSI devices (such as HD, MO, CD-ROM) been con-
firmed?
10. Troubleshooting