National Instruments NI 6115/6120 - Manual (Page 96)

Appendix A Specifications
© National Instruments Corporation A-17 NI 6115/6120 User Manual
Digital Trigger
Compatibility ......................................... TTL
Response ................................................ Rising or falling edge
Pulse width ............................................. 10 ns min
RTSI
Trigger lines ........................................... 7 1
Bus Interface
Type ....................................................... Master, slave
Power Requirement
+5 VDC (±5%)
NI 6115 ........................................... 2.2 A
NI 6120 ........................................... 3.0 A
+3.3 V..................................................... 0.8 A
Power available at I/O connector ........... +4.65 to +5.25 VDC at 1 A
Physical
Dimensions (not including connectors)
NI PCI-6115/6120........................... 31.2 by 10.6 cm
(12.3 by 4.2 in.)
NI PXI-6115/6120 .......................... 16 by 10 cm
(6.3 by 3.9 in.)
I/O connector.......................................... 68-pin male SCSI-II type
Environmental
Operating temperature............................ 0 to 50 °C
Storage temperature ............................... –20 to 70 °C
1 RTSI Trigger<6> is configured as the PXI Star Trigger for the NI PXI-6115/6120. Refer to the RTSI Triggers section of
Chapter 3, Hardware Overview , for more information.