Table 4-1. analog i/o connector pin assignment, Table 4-1, Analog i/o connector pin assignment -3 – National Instruments PCI-4452 User Manual

Page 33: 1 des

Advertising
background image

Chapter 4

Signal Connections

©

National Instruments Corporation

4-3

PCI-4451/4452 User Manual

Table 4-1. Analog I/O Connector Pin Assignment

Signal Name

Reference

Direction

Description

+ACH<0..3>

AIGND

Input

+Analog Input Channel 0 through 3—The PCI-4451 uses
+ACH<0..1> and the PCI-4452 uses +ACH<0..3>.

ACH<0..3>

AIGND

Input

Analog Input Channel 0 through 3—The PCI-4451 uses

ACH<0..1> and the PCI-4452 uses

ACH<0..3>.

AIGND

Analog Input Ground—These pins are the reference point for
single-ended measurements in SE configuration and the bias
current return point for differential measurements. All three
ground references—AIGND, AOGND, and DGND—are
connected together on your PCI-4451/4452 device, but each
serves a separate purpose.

+DAC0OUT

DAC0OUT

Output

+Analog Output Channel 0—This pin supplies the analog
non-inverting output channel 0. This pin is available only on
the PCI-4451.

DAC0OUT

+DAC0OUT

Output

Analog Output Channel 0—This pin supplies the analog

inverting output channel 0. This pin is available only on the
PCI-4451.

+DAC1OUT

DAC1OUT

Output

+Analog Output Channel 1—This pin supplies the analog
non-inverting output channel 1. This pin is only available on
the PCI-4451.

DAC1OUT

+DAC1OUT

Output

Analog Output Channel 1—This pin supplies the analog

inverting output channel 1. This pin is only available on the
PCI-4451.

AOGND

Analog Output Ground—The analog output voltages are
ultimately referenced to this node. All three ground
references—AIGND, AOGND, and DGND—are connected
together on your PCI-4451/4452 device, but each serves a
separate purpose.

+5 V

DGND

Output

+5 VDC Source—These pins are fused for up to 0.5 A and
supply power to the DSA signal conditioning accessories.
The fuse is self resetting.

DGND

Digital Ground—This pin supplies the reference for the +5
VDC supply. All three ground references—AIGND, AOGND,
and DGND—are connected together on your PCI-4451/4452
device, but each serves a separate purpose.

User.book Page 3 Tuesday, April 14, 1998 10:20 AM

Advertising
This manual is related to the following products: