Net Optics 96547iTP User Manual

Page 16

Advertising
background image

iTap GigaBit Dual Port Aggregator

12

To set the current date and time:

1. Type set time <mm/dd/yyyy-hh:mm:ss> where mm is the month, dd is the day

of the month, yyyy is the year, hh is the hour, mm is minutes of the hour, and ss
is seconds. Press Enter. Time is based on the 24-hour clock.

To display current settings:

1. Type show set and press Enter. The CLI displays the current setting similar to

the example in Figure 7.

Figure 7: Show Set Command Example

To disable the display and remote interfaces:

1. Type show display to view the current setting. The default value is Display:

ON.

2. Type display and press Enter. Access to the tap from remote interfaces will be

blocked and the front panel will not display link utilization or peak information.

3. Type display and press Enter again to restore the display and remote intefaces.

Advertising
This manual is related to the following products: