Net Optics 96547iTP - Manual (Page 38)

iTap GigaBit Dual Port Aggregator
34
Figure 30: New iTap
2. Enter a name for the iTap you are adding in the iTap Name text box. Each iTap
Name in the system must be unique.
3. Enter the IP address of the iTap in the IP Address text box. Make sure the IP
address is unique on the network.
4. Select your model of the iTap from the Product drop-down list.
5. Enter any relevant information about the iTap in the Notes text box.
6. Check your settings and click Create. The System Manger now shows the iTap
in the system similar to Figure 31.