Net Optics 96547iTP - Manual (Page 25)

iTap GigaBit Copper Port Aggregator
21
Chapter 4
Using Web Manager
Overview
This chapter describes how to monitor and control individual iTap GigaBit Port
Aggregators using Web Manager. The following topics are covered:
Accessing Web Manager
Status
Statistics
Confi guration
The iTap GigaBit Port Aggregator has built-in support for remote control from any
computer with an Internet browser and access to the iTap’s IP address. Web Man-
ager is the browser-based interface that allows you to change settings, view status,
and retrieve data remotely.
Note: ____________________________________________________________________
To access Web Manager, the Display option in the CLI must be set to ON. For
more information, see Using the Command Line Interface on page 9.
__________________________________________________________________________
Accessing Web Manager
Web Manager is a browser-based interface that provides access to an iTap that has
an IP address accessible from the computer running Web Manager. Web Manager
supports all common browsers.
To access Web Manager:
1. Open an Internet browser on your computer.
2. Enter the iTap’s IP address in the URL box and press Enter. The default IP
address is 10.60.0.123. The Web Manager page appears as shown in Figure 15.
•
•
•
•