Network Technologies ST-xU - Manual (Page 18)

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
14
Figure 13- Command Mode menus
Command Mode (Cont’d)
Function:
Keystroke:
Enter Edit Mode
Enter Maintenance Mode
Enter Touch Maintenance
Mode (only if the Touch Screen
option is installed)
Display Help Menu (available with
every control mode)
Sets scan time-out on
each port (in seconds)
Selects a specific port
Selects the first port on the switch
Selects the last port on the switch
Enters Search Mode and adds a character
to search string and selects the CPU’s
name that matches best.
Switch to a selected port
Exit Command Mode
E
Ctrl
+
M
Ctrl
+
F1
T - -
(xxx from 002 to 255. ie. t002
would set the time-out period
for 2 seconds)
- (0-2)
x (0-9)
x (0-9)
x
Ctrl
+
End
Enter
A-Z
0-9
(Type any alphabetical or numeric character)
Home
Esc
P - -
(Pxx would be P01, P02, etc.)
(0-9)
x (0-9)
x
Ctrl
+
Note: The user must exit Command Mode to type to a
CPU.
To exit Command Mode, either hold down any touch-
switch on the front panel for more than 2 seconds, OR
press <ESC>.
O
Ctrl
+
See Touch Screen Support option
on page 19 for more on Touch
Maintenance Mode