Network Technologies ST-xU - Manual (Page 20)

NTI NODEMUX SERIES UNIVERSAL KVM SWITCH
16
Edit Mode
Edit Mode allows the user to modify the names of the CPUs connected to the switch. Names of CPUs can be up to 12 characters
in length. When in Edit Mode, multiple keystroke combinations are not valid (<
SHIFT>+<P>, <CTRL>+<P>, <ALT>+ <P>, and <P>
will all type a “P” to the display - lower case letters cannot be typed). After changes have been made the user will be prompted by
the menu to save the changes. Answer "Y" to save changes and answer "N" to continue using previously entered port names.
Function: Keystroke:
Move cursor one position
to the right
Move cursor one position
to the left
Previous port
Next port
Selects the first port on
the switch
Figure 15- Edit Mode
Selects the last port on
the switch
Toggles between insert
and overstrike
Erase current character
Erase previous character
When finished making changes in Edit Mode, press < Enter> and a prompt will appear to press either <Y> to save the changes or
< N> to continue making changes without saving the changes just made. If the <ESC> key is pressed instead of <Enter>, all
changes made will be cancelled and the display will return to the previous menu.
Home
Delete
Backspace
Insert (The character either gets inserted and the remainder of the name
gets shifted to the right, OR the current character gets overwritten.)
End