Navini Networks Ripwave MX - Manual (Page 15)

Navini Networks, Inc. Ripwave MX Modem User Guide
Installing Navini
Diagnostics
(NavDiag)
The NavDiag software assists you in solving connection problems
and provides other valuable information. This software is provided
on a CD that came in your Modem package. This section explains
how to install this software.
Note: To install NavDiag on a Windows 2000, you must have
administrative privileges. To check your account privileges, open
your Control Panel. Double-click on the Users and Passwords
symbol. You should see Administrator under the Users tab.
Note: The screenshots shown in these instructions were taken
from a laptop with Windows 2000. If you have a Windows XP
operating system, the screens you see may vary from the screens
shown in the instructions.
Step Action
Illustration
1. Before installing the
NavDiag software, shut
down all programs,
including anti-virus
software programs.
2. Insert the Navini
Diagnostics Installation
CD into the CD-ROM
drive.
3. Open the CD by clicking
on the My Computer
icon. Double-click on
the folder named
Navini_Diagnostics.
4. Double-click on the icon
for the file
navdiag_windows.exe*.
This will automatically
start the installation of
the Navini Diagnostics.
*If your PC is running Mac
or Linux software, you will
need the navdiag_mac.sit or
navdiag_linux.bin file. Mac
users will need the Snuffit
extraction software.
Example:
15
060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)