Navini Networks Ripwave MX - Manual (Page 9)

Navini Networks, Inc. Ripwave MX Modem User Guide
Operating
Frequencies
Minimum
Computing
Requirements
(See, also, Addendum 1)
Modem Model Frequency Range Operating
Band
2.3 GHz LMX 2305-2360
LMX E
2.305 GHz – 2.360 GHz WCS
2.4 GHz LMX 2400-2483
LMX E
2.400 GHz – 2.483 GHz ISM
2.5–2.6 GHz LMX 2.5-2.6
LMX E
2.496 GHz – 2.690 GHz EBS-BRS
3.4 GHz LMX 3410-3525
LMX E
3.410 GHz – 3.525 GHz WLL
3.5 GHz LMX 3475-3600
LMX E
3.475 GHz – 3.600 GHz WLL
The “E” in the model name stands for Ethernet. Your computer
should have an Ethernet port for connecting the Modem..
The following table lists the minimum requirements your computer
should meet before connecting to the Ripwave MX Modem.
Operating
System
1
:
Windows 2000 or Windows XP 2 . It is assumed the
latest Windows service pack is installed on the
Operating System.
General Information:
Ensure that the PC network port is enabled.
CPU:
Pentium level or higher
RAM:
32 MB or the Operating System minimum,
whichever is greater
Hard Drive:
50 MB free disk space for the Navini Diagnostics
monitoring software
4
Monitor:
256 colors, 800 x 600 resolution
1 Note: To upgrade your Operating System after loading the Navini Diagnostics
software, you must first uninstall Navini Diagnostics prior to upgrading the OS.
Otherwise, Navini Diagnostics will not work. See
Uninstall instructions in this
Guide.
2 Note: Windows XP must be Service Pack Level 1 or higher.
4 Note: Navini Diagnostics software is supported on Win2000, WinXP or higher,
Mac X (also called Mac10) or higher, or Red Hat Linux 8.0 or higher. Mac users
must have the Snuffit extraction software.
9
060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)