Connecting the, S-ebp, The indicator light on the s-ebp – Navini Networks Ripwave MX User Manual
Page 26: Onnecting the, S-ebp t, Ndicator, Ight on the, Connecting the s-ebp, The indicator light, On the s-ebp
Navini Networks, Inc.
Ripwave MX Modem User Guide
Connecting the
S-EBP
The Indicator Light
he optional battery packs are not installed inside the Modem.
d
connected to the M
nnect the S-EBP to
r M
ck’s pig-ta
socket located on the back of the Modem.
he S-EBP has one indicator light that resides on top of the unit.
his light has four states associated with it. The states are
on the S-EBP
T
Instea they are
odem. To co
you
odem, plug the battery pa
il cord into the input
T
T
described below.
Battery
LED
Battery
Charger
Connected
Modem
Connected
& Switched
On
Modem
On/Off
Button is
Lit
Comments
Green Yes
Not
applicable
Not
Battery fully charged.
applicabl
e
Amber Yes
Not
applicable
Not
applicabl
Battery charging.
e
Off
Yes
o power is
wasted on the battery
LED.
No
Yes
Normal. Battery is
supplying power to
Modem. N
Red
Yes
power to Modem
is low. 5% charge left.
1
No
Yes
Battery is supplying
. Battery
Off
No
Yes
No
Battery is out of power.
Off
No
No
No
Battery LED is off. Status
of battery is unknown.
26
060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)