Navini Networks Ripwave MX - Manual (Page 27)

Navini Networks, Inc. Ripwave MX Modem User Guide
The Indicator Light on t
tinued
he
harging the
-EBP
for
e
t the battery’s charge
vel is low. After a limited duration, the internal circuitry will shut
own both the LED and the battery to prevent the battery from
oing into a deep-discharge state. Recharging the battery will
store it to its normal healthy state.
he S-EBP needs to be recharged when the battery is connected to
Modem and the Modem is turned on but the LED on top of the
attery remains off (indicating the battery has no power) or is red
ndicating the battery level is low).
o recharge the S-EBP, use only the 12V charger that came with
e S-EBP. Using any other charger can damage the battery. To
harge the S-EBP, plug the 12V adapter into the 12V input socket
n the S-EBP.
Note: The battery may charge while it is
Modem.
N
Do not at to plug 2V ad
Modem as this can harm the Modem.
S-EBP, con
C
S
Note
1
: As with any battery, when the S-EBP is left unused
a long period of time, it tends to lose its charge. When this happens
and when the charge drops to approximately 5% of the full charg
level, the red LED comes on to indicate tha
le
d
g
re
T
a
b
(i
T
th
c
o
connected to a
ote:
tempt the 1 apter into the
27
060825_pv1.6_Ripwave-MX Modem User Guide_40-00382-00Rc(4.5)