Network Technologies CAT5 - Manual (Page 20)

15
Change the Default Administrator Password
Once the administrator is logged in, it is recommended (for greater security) that the the administrator change the default
administrator password.
To change the administrator password:
- Press < A> (Administration Menu) - < U > (User Configuration)
- Select the user “ root ” to open the “Edit User” menu
- Press < P > to open the “password” field.
- Type in a new password (case sensitive, 16 characters maximum, alphanumerc)
- Press < Tab > to open the “confirm” field
- Re-type the new password to confirm
- Press < Enter > to finish and save.
Note: If you press <Enter> again, you will have to retype the confirmation.
Press <
Esc > to exit the menu, or < P > to change it again.
Note: In the event the password is forgotten, contact NTI for instruction on how to reset the password to the default
"nti".
Note: User names and passwords are case sensitive.