Network Technologies CAT5 - Manual (Page 39)

34
Function Description Keystroke
---- Toggle Specific selection Spacebar
Find Locate Host Adapter by name F
All Allow user access to all Host
Adapters
A
None Allow user access to no Host
Adapters N
Help Display topic specific help page F1
---- Esc Esc
Figure 33- Host Access Controls list
User Station Configuration
From the Administration menu (page 26) press <
R > to bring up the User Station Configuration menu. (From Command Mode
press < A > - < R >.)
Figure 34- User Station Configuration screen
To edit the User Station Info use the commands and enter the desired parameter values as defined in the chart below:
Suggestion: Use the < Tab > key to quickly jump between editable fields for easy configuration management.
Function Description Keystroke Parameter Value
Name Modify the name (this only has a practical
purpose when the User Station is in Matrix
Mode.) N String, 16 characters max., case
sensitive
Set Keyboard Language Set the keyboard language for use with the
CPU K None. Brings up Keyboard
Languages menu. Choose from list.
Auto-login Select the Auto-login user to be
automatically logged in at power up A None. Brings up Select User menu.
Mode Choose User Station mode
See “Note” above
M + Spacebar Toggle between “Stand-alone” and
“Matrix”
Y / N Confirmation required
Help Display topic specific help page F1 None
---- Return to Administration Menu Esc None
Note: The “Mode” setting
should be left as “Stand-
alone” whenever the User
Station is being used by itself.
Only set it to “Matrix” if the
User Station will be used in
conjunction with a PRIMUX
Matrix Multi-User KVM Switch.
If this setting is changed to
“Matrix” by mistake, contact
NTI for instruction to return
the setting to “Stand-alone”.