Network Technologies CAT5 - Manual (Page 7)

2
Materials
Materials Supplied with this kit:
Materials Not Supplied, but REQUIRED :
•
NTI HA-PS2 PS/2 Host Adapter / HA-USB USB Host Adapter / HA-SUN Legacy SUN Host Adapter / HA-RS Serial Host
Adapter (see pg. 5)
•
CAT5/5e/6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg.
47 for proper EIA/TIA 568B wiring method)
•
NTI-RJ45MF-RS232-CO crossover adapter will be needed if an HA-RS Host Adapter is being used and connected to a DCE
type device (see page 7)
Cables can be purchased from Network Technologies Inc by calling 800-RGB-TECH (800-742-8324) or (330)-562-7070 or
by visiting our website at
www.networktechinc.com .
Please Note: A PRIMUX-UZR User Station with firmware version 2.0 and later will not recognize or work with a Host
Adapter programmed with firmware version 1.6 and earlier. If you have Host Adapters with firmware version 1.6 and
earlier, they must first be updated to firmware version 2.0 using a PRIMUX-UZR User Station programmed with firmware
version 1.9. After updating all Host Adapters, the PRIMUX-UZR User Station can then be updated to firmware version
2.0 to work with the newly updated Host Adapters. Firmware version 1.9 (with version 1.6 Host Adapter firmware) and
firmware version 2.0 can be found at
http://www.networktechinc.com/download/d-kvmswitch-cat5.html . Instruction for
changing the firmware in the User Station and Host Adapters is included in the .zip file with the firmware.
Note: The HA-RS Host Adapter will only work with User Stations programmed with firmware version 2.0 and later.
Terminating Plug
AC Adapter Line cord, country specific
120VAC or 240VAC @ 50 or 60Hz -5VDC/2A AC Adapter
NTI PRIMUX-UZR User Station
PRIMUX CD w/ Owner's Manual and
Quick Start Guide (pdf files)
PRIMUX Quick Start Guide (printed)
DINT-6-FF Null Modem Cable