N-Tron 102PC-SE - Manual (Page 15)

(Revised 2010-11-15) 15
CLI TREE of MENUS
 Set
(Set configurable fields)
o ag-server (Configure ag-server)
 enable/disable (enable or disable ag-server)
o auto-discovery (Configure auto-discovery feature)
 broadcast-timer (set the broadcast timer)
 enable/disable (enable or disable auto-discovery)
 server-port (set the server‟s port number)
o boot-messages (Setup boot messages)
 enable/disable (enable or disable boot-messages)
o bridge (Configure bridge modes)
 enable/disable (enable or disable bridge mode)
 ipmodule ip-address (Configure the bridge‟s ip address)
o date (Configure the date in DD/MM/YYYY format)
o device-parameter (Set new device parameters, up to 99)
o ftp (Configure FTP information)
 machine (remove FTP login options)
 filename (specify the filename)
 filesize (specify the file size)
 directory (specify a directory)
o login (Configure login settings)
 auto-dialout-login (enable or disable auto-dialout-login)
 enable/disable (enable or disable login feature)
o ip (Configure IP settings for the Ethernet port eth0)
 auto-dialout (enable or disable the auto-dialout feature)
 def-gway (setup the default gateway in the format of xxx.xxx.xxx.xxx)
 dns (enable or disable the DNS features below)
 hostname (setup the 102PC-SE‟s hostname)
 http (enable or disable the webpage options)
 http-page (display the serial page or the default page)
 http-port (configure the port number that the web page is broadcasted over)
 http-banner (set a string to be the http banner)
 pri-dns (setup the primary DNS server in the format of xxx.xxx.xxx.xxx)
 sec-dns (setup the secondary DNS server in the format of xxx.xxx.xxx.xxx)
 syslogd (enable or disable system logging)
 syslogd-server (setup the server for log files in the format of xxx.xxx.xxx.xxx)
 tcp-keepalive (configure the time intervals between keep alives, 3-120 minutes)
 telnet (configure user settings when using telnet to connect to the device)
escape-monitor (enable or disable the escape monitor)
escape-string (set the escape string, default is „+++inet‟)
inactivity (enable or disable an inactivity timout)
inactivity-timeout (set the inactivity age time)
raw-mode (enable or disable raw mode)
 telnet-port (set the telnet port number)
 tftp (enable or disable TFTP)
 udp (configure udp settings)
inactivity (enable or disable udp‟s inactivity feature)
inactivity-timeout (set the inactivity timeout period)
terminate-monitor (enable or disable terminate-monitor)
terminate-string (set the terminate string)
 eth0 (configuration options for Ethernet port eth0)
dhcp-client (enable or disable DHCP over eth0)
ip-address (set a static IP address and subnet mask)
o ppp ppp0 (Configure ppp settings for the ppp0 port)
 auth-type (chap, pap, or pap-chap authentication types)
 authentication (enable or disable authentication)
 compression (enable or disable compression)
 comp-type (bsd, deflate, or both compression types)
 enable/disable (enable or disable ppp0)
 password (set a ppp0 password)
 raw-mode (enable or disable raw-mode)
 username (set a ppp0 username)
(continued…)