N-Tron 102PC-SE - Manual (Page 37)

(Revised 2010-11-15) 37
Using E-Mail Features
Mandatory Configuration Settings
The following items must be configured in order to send e-mails :
Set the SMTP server address.
# set send-mail smtp-server-name <smtp.servername.com>
Set the port number the SMTP server is using.
# set send-mail smtp-server-port <25>
Set the host name that you are sending from.
# set send-mail host-name <hostname>
Set the e-mail address that you are sending from.
# set send-mail from-address <[email protected]>
Set an identity for this e-mail address that you are sending from.
# set send-mail from-address-identity <Smith>
The following items must be configured in order to receive e-mails
:
Set the POP3 server address.
# set recv-mail server-name <mail.servername.com>
Set the port number the POP3 server is using.
# set recv-mail server-port <110>
Set the user name for the POP3 server.
# set recv-mail mailbox-name <username>
Set the password for the username‟s account on the POP3 server.
# set recv-mail mailbox-password <password>
Configure if you want to leave the messages on the POP3 server or not.
# set recv-mail leave-on-server <enable/disable>